Online only

DJI Naza-M V2 Flight Controller With GPS Combo



DJI Naza-M V2 Flight Controller With GPS Combo The DJI NAZA-M V2 flight controller combo pack comes with the GPS module, PMU multi-funcion module and LED module.  Suitable for tricopters, quadcopters, hexacopters, octocopters, even fixed wing drones!

More details

In Stock

By buying this product you can collect up to 325 loyalty points. Your cart will total 325 points that can be converted into a voucher of US $6.34.

US $331.47

Add to wishlist

More info

DJI Naza-M Lite Version Multirotor Flight Controller GPS Combo



All-in-One Design
DJI adheres to continuous innovation and improvement. With the new firmware, new attitude stabilization algorithm and optimized hardware structure, the Naza-M V2 provides better flight performance.
The innovative all-in-one design simplifies installation and saves space and weight. It contains inner damping, controllers, 3-axis gyroscope, 3-axis accelerometer and barometer in its light and small main controller. It can measure flying altitude and attitude and therefore can be used for autopilot/automatic control.


Independent PMU With Amazing Function Extension
The Naza PMU V2 has enhanced BEC functionality and provides extendable CAN BUS ports, which can support iOSD, Zenmuse H3-2D gimbal (pitch control). Support is also included for optional Bluetooth LED module to allow parameter adjustment via a mobile APP (future firmware upgrade required for this functionality)


Advanced & Improved Attitude Stabilization Algorithm
The latest fourth generation attitude stabilization algorithm not only inherits the outstanding flight stability of DJI products, but also provides excellent maneuverability even without the GPS module. It is more flexible and stable, and gives the hobbyists a wonderful flight experience. New features have been included such as GPS course automatic compensation, GPS & compass sensor calibration, new take-off mode, etc.


Nine Types of Multirotors Supported
Naza-M V2 now supports nine types of multirotors; Quad I, Quad X, Hexa I, Hexa V, Hexa Y, Hexa IY, Octo X, Octo I, Octo V


Multiple Flight Control Modes/Intelligent Switching
Three types of control modes: GPS Atti. Mode (with GPS module), Atti. Mode and Manual Mode. The pilot can switch between the three modes to achieve different flight characteristics. It also can adjust automatically within the flight environment and intelligently switch between GPS Atti. Mode and Atti. Mode to make sure the flight is safe and secure. In the software you can choose manual, attitude or fail-safe; it supports one key fail-safe trigger.


GPS Module Available/Accurate Position Hold
The plug and play GPS module will greatly enhance the performance for aerial photography with accurate Position Hold, Return-To-Home and Intelligent Orientation Control functionalities. With the GPS Module, the multirotor will have position and altitude locked accurately even in windy conditions. Hovering accuracy is approximately 2.5m horizontal and 0.8m vertical.


New Assistant Software for Smartphone
The Naza-M now provides assistant software for iPhone4s, iPhone5, iPad3, iPad4, iPadmini and iPod5. You can do parameter adjustments at any time on your mobile devices, using only the BTU with a built-in Bluetooth module which makes it easier and more convenient. It uses low power Bluetooth to minimize the power consumption of your mobile devices. It is easy to use and will automatically save your last connection records. The password mechanism ensures your safety link. Parameters can be automatically synchronized to the cloud server and can be restored immediately when you changed your mobile devices.

iOSD Mini Supported
The Naza-M now supports iOSD Mini. This will undoubtedly give you a fantastic FPV flight performance. Depending upon DJI’s accumulation of historic and reliable information integration technology, the iOSD Mini can grab the most accurate first-hand flight data information in the shortest possible time.

Intelligent Orientation Control
Usually, the forward direction of a flying multirotor is the same as the nose direction. By using Intelligent Orientation Control (IOC), wherever the nose points, the forward direction has nothing to do with nose direction.  In course lock flying, the forward direction is the same as a recorded nose direction.  In home lock flying, the forward direction is the same as the direction from home point to multi-rotor

Enhanced Fail-safe Mode
If your transmitter supports fail-safe, then you can set fail-safe through port-U. The Naza controller has built-in auto level fail-safe function, which means when the communication between the MC and the transmitter is disconnected, the outputs of all command sticks will go to center position. If the GPS module is used, you can also set RTH on fail-safe. If your transmitter has only 4 channels, then MC will work in Atti. Mode by default without the fail-safe function.

Two Levels of Low Voltage Protections
In order to prevent your multirotor from crashing or other harmful consequences caused by low battery voltage, DJI has designed two levels of low voltage protection. You can choose not to use this, however it is strongly recommended.  Both levels of protection have LED warnings by default. The first level will blink the red light continuously; the second level will blink a red light continuously and the multirotor will descend and land. In manual mode when low voltage protection is triggered the LED warning will be active only.
Motor Arm and Motor Disarm
There are four ways to start the motors:

When you want to start the multi-rotor, you need to perform any of the ways of CSC. During the flight, if the motors stop, you can immediately execute the CSC and the motors will start. This enhances the safety of the multirotor; no uncontrolled starting of the motors.

Motor Disarm: There are two modes of Motor Disarm: namely Intelligent Mode and Immediate Mode. For more information, please refer to the user manual or DJI Wiki.

Note: It has a brand new, smoother take-off algorithm, which is more stable and provides a brand new experience in supporting double spring TX; every time the throttle stick is released the multirotor will hover.


PPM, S-BUS & Ordinary Receiver Supported
Minimum four channel receiver supported, also PPM and Futaba S-Bus receivers  are supported. PPM & S-Bus receivers (the general use of the first 8 channels of S-Bus receiver) to optimize the channel connection, the A, E, T, R, U five-channel functions are set using channel X2, use only one servo cable to connect the PPM or S-Bus to X2, this makes installation quick and easy.


Independent LED Module
The independent LED module makes the indication of the flight status and the system status to the ground much clearer. The pilot can get information more quickly and more conveniently, even at night, the pilot can get real-time flight information feedback through the LED flashing frequency and color. In addition, the module has a USB interface, which is used for parameter settings and firmware upgrades.


Built-in Gimbal Stabilization Function
The gimbal stabilization module is compatible with almost all 2-axis gimbal systems. The system will adjust the gimbal and camera according to the attitude of the aircraft after setting the parameters the first time.


Multirotor One-power Output Fail Protection
In most conditions, the whole multirotor will retain good attitude and rotate around the frame arm with no power output, due to imbalanced mechanical structure and external environment.  Rotating is mainly caused by payload and external environment.  When the payload is heavier, rotating speed is faster.  On rotating, the aircraft's physical structure can cause rudder to become out of control.  This humanistic protection function from Naza-M V2, in Attitude or GPS Mode, keeps attitude under control.


Remote Gain Adjustment
The default parameter settings are preset for you to achieve a normal flight, and also supports remote parameter adjustment by using a control slider on the TX during flight in order to obtain better performance.


New Assistant Software & Firmware Online Update
The user interface of the assistant software has been comprehensively updated and brings you a new interactive experience.  The logical design makes your parameter settings more simple and convenient.  Like other DJI products the Naza-M V2 firmware can be upgraded free online.


Package Includes:

1 x DJI NAZA-M V2 multirotor flight controller
1 x DJI NAZA-M V2 GPS module
1 x DJI NAZA-M PMU V2 multi-function module
1 x DJI NAZA-M V2 LED module

You May Also Be Interested In